The Ideastep Insole is compact, strong, and shock-absorbing, making it perfect for those of us who sweat a lot.
Comfort and odor are two things that people associate with Ideastep Insole. When you are exposed to bare feet, sweat, and, of course, the elements, the smell develops. It’s a normal ailment that, as you would imagine, is simple to treat with some TLC.
Your Ideastep Insole tops should be leather, suede, or nubuck, and your cork footbeds should be cared for. These materials resist water damage, so you can start wearing your Ideastep Insole with a water-resistant stain right away.
Try this deodorizing powder for Ideastep Insole and similar shoes: 3 tbsp baking soda, 1 tbsp corn starch, and 5 drops tea tree oil Before you put your shoes on, sprinkle the mixture on them. Enable your shoes to sit overnight before shaking them off the next day. Then, when wearing your shoes, spray the mixture on them. The soles of these shoes are made of cork.
Cover the sink with 2 cups of water and 1 cup of white vinegar after draining. Allow for a 5- to 10-minute soak. Clean the insole by rinsing it with fresh water and pressing a clean towel to the side to drain any excess water.
Baking soda can be used to freshen up stale shoes at home. To make the shoes smell fresh, sprinkle some baking soda on them. Be sure to coat the insole with baking soda first. As seen below, sprinkle a well-thought-out layer of baking soda.
Place the insole on an old towel or newspaper and sprinkle baking soda on top if you don’t have a bag or cup. Remove the baking soda-coated shoe the next day. Leave the shoe in its current state.
To make a foam, rub it into the insole. Remove the foam with a moist cloth until the insoles are clean. If you can’t get rid of them absolutely, use a diluted alcohol solution distilled from white vinegar to wash them away. Allow to dry in a ventilated area.
Fill the footbed with baking soda at the end of the day. To make a solution, dilute the white vinegar with water. Mist the sandals and the footbed with the solution in a spray bottle. Enable 30 minutes for drying in the sun. Anything that hasn’t been consumed by the next day should be discarded.
Wipe the paste with a moist (not wet) rag. If the shoe is still dirty, wipe it again with more cleaning paste on the footbed. Rep steps 1–8 for the other pair of shoes. When the shoes are clean enough, put them in a cool place inside for 24 hours to dry.
To make a paste, blend the powder with a small amount of water. Apply a fifth of the paste to the shoe’s footbed (do not brown). Using an old toothbrush with cleaning strength, uniformly distribute the paste with your fingertips. Scrub the paste in a circular motion over the shoe bed.
Spoon a small amount onto a microfiber cloth and spray it on the straps in small amounts (you want to steam the suede, not pour it on). 3rd step: If you have a deep stain that you can’t remove with your fingertips, try white vinegar. To remove loose particles, use a brush to remove the stain.
Step 2: Using a dry cloth, wipe away any leftover cleaner. Step 3: Add a thick layer of leather conditioner to the top with a clean, dry cloth. Apply the conditioner to the entire bandwidth in a circular motion. Step 4: After applying leather cleaner, allow at least 24 hours for it to dry before wearing your shoes.
Step 1: Clean the top with a damp cloth. If there is some sticky mud, scrub it away with a detergent. Step 2: Wash the soap by rinsing it in the sink with a non-soapy damp towel. Phase 3: For the footbed, repeat steps one and two. To dry the top, use a clean cloth.
Using a damp rag, wipe the cork sole. Remove any stubborn dirt or oil stains from the sole. Wet the bristles of a smooth, bristly toothbrush. Rep this step until all of the soil and dirt has been extracted.
Sandals and shoes will also have their soles replaced. Due to normal wear and tear, birch canes with exposed cork footbeds can need cork repairs over time. This can be accomplished by using heat to form the cork so that the original shape of the footbed can be rebuilt or ground.
In a spray bottle, combine equal parts water and grater alcohol. To make sure the mixture is uniformly mixed, give it a good shake. Both sides of the insole should be sprayed with the mixture. The grater alcohol should be totally dry as soon as the spray is ready.
Before you add them fully, test them on a small section of the slippers. Slippers with cotton uppers or leather applications made of cork or latex should be machine washed on a gentle cycle at 30 degrees for several minutes. The wool slippers should be cooked in the washing machine at 30 degrees for at least a few minutes, according to the maker. Please notice that slippers should only be washed once after use, as none of the above tips are machine washable.
The anti-odor insert is a perfect way to not only get rid of but also avoid unwanted foot odors in the first place. Leather, terry cloth, and cork fleece are excellent moisture-wicking fabrics that help keep your feet odor-free.